configure mac-locking ports static
Creates, enables, and disables a static MAC locking entry.
|port_list||Specifies one or more ports or slots and ports.|
|add||Adds a MAC locking association between the specified MAC address and port.|
|enable||Enables an existing MAC locking association between the specified MAC address and port.|
|disable||Disables an existing MAC locking association between the specified MAC address and port.|
|station_mac_address||Specifies the MAC address.|
A static MAC locking association is enabled by default.
Up to 64 MAC addresses can be locked per port.
When added and enabled, a static MAC lock configuration allows only the end station designated by the MAC address to participate in frame relay.
Disabled entries are counted when calculating the total number of locked stations.
The following example creates a MAC locking association between port 14 and 00-a0-c9-0d-32-11.
configure mac-locking ports 14 static add 00-a0-c9-0d-32-11
This command was first available in ExtremeXOS 15.7.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.