Disables the auto provision capability.
This command has no arguments or variables.
Use this command to disable the auto provision capability.
To display the status of auto provision on the switch, use the show auto-provision command.
The following command disables the auto provision capability:
The following message is displayed:
# disable auto-provision This setting will take effect at the next reboot of this switch.
This command was first available in ExtremeXOS 12.5.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.