disable ripng export

disable ripng export [direct | ospfv3 | ospfv3-extern1 | ospfv3-extern2 | ospfv3-inter | ospfv3-intra | static | isis | isis-level-1| isis-level-1-external | isis-level-2| isis-level-2-external | bgp e-bgp i-bgp]


Disables RIPng from redistributing routes from other routing protocols.

Syntax Description

direct Specifies directly reachable subnets from the router (only interfaces that have IP forwarding enabled are exported).
ospfv3 Specifies all OSPFv3 routes.
ospfv3-extern1 Specifies OSPFv3 external route type 1.
ospfv3-extern2 Specifies OSPFv3 external route type 2.
ospfv3-inter Specifies OSPFv3-inter area routes.
ospfv3-intra Specifies OSPFv3-intra area routes.
static Specifies user configured static routes.
isis Specifies IS-IS routes.
isis-level-1 Specifies IS-IS Level 1 routes.
isis-level-1-external Specifies IS-IS Level 1 External routes.
isis-level-2 Specifies IS-IS Level 2 routes.
isis-level-2-external Specifies IS-IS Level 2 External routes.
bgp Specifies BGP IPv6 routes
e-bgp Specifies EBGP routes.
i-bgp Specifies IBGP routes.



Usage Guidelines

This command disables the exporting of static, direct, IS-IS, and OSPF-learned routes from the switch routing table into the RIPng domain.


The following command disables RIPng from redistributing any routes learned from OSPFv3:

disable ripng export ospfv3


This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS 32.2 Feature License Requirements document.