show iqagent
Description
Displays information about the ExtremeCloud™ IQ Agent.
Syntax Description
| iqagent | Specifies showing information about IQ Agent. |
| discovery | Specifies showing information about IQ Agent discovery. |
Default
N/A.
Usage Guidelines
If IQ Agent is not running, only the first section appears. A device is registered on an IQ server using the serial number.
Example
The following example shows information about IQ Agent:
# show iqagent ---------------------------------- -------------------------------------------- State Enabled Active VR VR-Mgmt Detected VR VR-Mgmt XIQ Address 10.16.231.95 Serial Number 1405G-00056 ---------------------------------- --------------------------------------------
The following example shows discovery information for IQ Agent:
# show iqagent discovery ----------------------------------------------------------------------------- Virtual-Router : VR-Default XIQ FQDN CLI : XIQ DHCP IP : XIQ DHCP FQDN : test.com Redirector : ----------------------------------------------------------------------------- Virtual-Router : VR-Mgmt XIQ FQDN CLI : 10.16.231.95 XIQ DHCP IP : 1.2.3.4 XIQ DHCP FQDN : test2.com Redirector : -----------------------------------------------------------------------------
The following example shows information about IQ Agent with a configured HTTP proxy (line 14):
# show iqagent ---------------------------------- -------------------------------------------- State Enabled Active VR VR-Mgmt Detected VR VR-Mgmt XIQ Address 10.51.3.175 Serial Number 1546N-40030 ---------------------------------- -------------------------------------------- Status CONNECTED TO XIQ Version 0.4.5 Last Onboard Time 15:05:38 11 12 2020 UTC Debug ON Source Interface DEFAULT HTTP Proxy iqagent@10.51.3.163:3128 ---------------------------------- -------------------------------------------- Association Method CLI Association Url https://10.51.3.175/hac-webapp/rest/v1/association Poll URL https://10.51.3.175/hac-webapp/rest/v1/poll/1546N-40030 ---------------------------------- -------------------------------------------- Last Health Status SUCCESS Last Health Success Time 15:05:41 11 12 2020 UTC ---------------------------------- -------------------------------------------- Last Poll Status SUCCESS Last Poll Success Time 15:05:38 11 12 2020 UTC ---------------------------------- -------------------------------------------- Last Monitor Status SUCCESS Last Monitor Success Time 15:05:48 11 12 2020 UTC ---------------------------------- --------------------------------------------
The following example shows information when there is a configured IQ Agent Management VLAN:
# show iqagent ---------------------------------- -------------------------------------------- State Enabled Active VLAN Mgmt User VR VR-Mgmt User VLAN Mgmt XIQ Address 10.51.3.175 Serial Number 1409G-00236 ---------------------------------- -------------------------------------------- Status CONNECTED TO XIQ Version 922.755.1 Last Onboard Time 09:57:48 05 10 2022 UTC Debug ON Source Interface 10.127.2.117 HTTP Proxy None ---------------------------------- -------------------------------------------- Association Method CLI Association Url https://10.51.3.175/hac-webapp/rest/v1/association Poll URL https://10.51.3.175/hac-webapp/rest/v1/poll/1409G-00236 ---------------------------------- -------------------------------------------- Last Health Status SUCCESS Last Health Success Time 10:13:50 05 10 2022 UTC ---------------------------------- -------------------------------------------- Last Poll Status SUCCESS Last Poll Success Time 10:13:48 05 10 2022 UTC ---------------------------------- -------------------------------------------- Last Monitor Status SUCCESS Last Monitor Success Time 10:13:49 05 10 2022 UTC ---------------------------------- --------------------------------------------
History
This command was first available in ExtremeXOS 30.7.
IQ Agent status was added in ExtremeXOS 31.1.
HTTP proxy support was added in ExtremeXOS 31.3.
IQ Agent Management VLAN was added in Release 32.1.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465 series switches.