configure network-clock sync-e clock-source

configure network-clock sync-e clock-source [source-1|source-2] {quality-level value}

Description

Configures synchronous Ethernet clock-source to be a source 1 or source 2 for synchronizing clock.


source-1	Source 1 external input clock.
source-2	Source 2 external input clock.
`value`	Value of the Quality level of the clock (T1 default QL_ST3, E1 default QL_SEC).

None of the ports are source 1 or 2.

Use the following command to configure "source-1" as the Synchronous Ethernet clock-source. It generates ESMC messages with quality level QL_PRC.

configure network-clock sync-e clock-source source-1 quality-level QL_PRC

If no quality-level is specified, the default value is used (T1 default QL_ST3, E1 default QL_SEC).

# configure network-clock sync-e clock-source source-1 quality-level QL_PRC

This command was first available in ExtremeXOS 15.1.

This command is available on the ExtremeSwitching X460-G2 platform.