unconfigure radius

unconfigure radius {mgmt-access | netlogin} {server [primary | secondary]}

Description

Unconfigures the RADIUS client configuration.

Syntax Description

mgmt-access Specifies the switch management RADIUS authentication server.
netlogin Specifies the network login RADIUS authentication server.
primary Unconfigures the primary RADIUS server.
secondary Unconfigures the secondary RADIUS server.

Default

Unconfigures both primary and secondary servers for management and network login.

Usage Guidelines

If you do not specify any keywords, this command unconfigures both the primary and secondary servers for management and network login.

The following list describes the available keywords:
  • mgmt-access—Use this keyword to unconfigure only the server(s) for management functions.

  • netlogin—Use this keyword to unconfigure only the server(s) for network login.

  • primary—Use this keyword to specify only the primary RADIUS sever.

  • secondary—Use this keyword to specify only the secondary RADIUS server.

Example

The following command unconfigures the secondary RADIUS server settings for both management and network login:

unconfigure radius server secondary

The following command unconfigures the secondary RADIUS server settings for only network login:

unconfigure radius netlogin server secondary

The following command unconfigures all RADIUS server settings for only management functions:

unconfigure radius mgmt-access

History

This command was first available in ExtremeXOS 10.1.

The mgmt-access and netlogin keywords were added in ExtremeXOS 11.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.