configure ripng add
Description
Configures RIPng on an IP interface.
Syntax Description
| vlan-name | Specifies an IPv6 configured VLAN. |
| tunnel-name | Specifies an IPv6 tunnel. |
| all | Specifies all IPv6 configured VLANs or tunnels. |
Default
N/A.
Usage Guidelines
For RIPng to be active on the interface, it must also be globally enabled using the command disable ripng export [direct | ospfv3 | ospfv3-extern1 | ospfv3-extern2 | ospfv3-inter | ospfv3-intra | static | isis | isis-level-1| isis-level-1-external | isis-level-2| isis-level-2-external | bgp]. If the keyword all is specified, all IPv6 configured VLANs or tunnels will be configured for RIPng.
Example
The following command configures RIPng on the VLAN finance:configure ripng add finance
History
This command was first available in ExtremeXOS 11.2.
Platform Availability
This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS 32.2 Feature License Requirements document.