configure network-clock ptp delete unicast-master

configure network-clock ptp [boundary | ordinary] delete unicast-master ipv4_address [{vlan} vlan_name]

Description

Delete an entry from the unicast master table for a PTP clock instance. This command is available only for boundary clocks.

Syntax Description

boundary

Boundary clock.

ordinary

Ordinary clock.

ipv4_address

IPv4 address of a master to the local clock.

vlan_name

VLAN name to which the command is to be applied.

Default

N/A.

Usage Guidelines

Use this command to delete an entry from the unicast master table for a PTP clock instance. This command is available only for boundary clocks.

Example

The following command removes a static unicast master entry from boundary clock:

# configure network-clock ptp boundary delete unicast-master 192.168.1.1 vlan lpbk-gm

The following command removes a static unicast master entry from ordinary clock:

# configure network-clock ptp ordinary delete unicast-master 192.168.15.10 vlan lpbk-master

History

This command was first available in ExtremeXOS 15.1 Revision 2.

Platform Availability

This command is available on the ExtremeSwitching X460-G2 platform.

Note

Note

PTP commands can be used only with the Network Timing feature pack.