configure cdp power-available ports
This command configures the advertising status of the power available TLV on CDP ports.
|advertise||Specifies to send the TLV to neighbors.|
|no-advertise||Specifies not to send the TLV to neighbors.|
|port_list||Port list separated by a comma or - .|
This command is for This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, and X620 series switches. switches.
The following example advertises the Power Available TLV on port 1:
configure cdp power-available advertise ports 1
The following example does not advertise the Power Available TLV on port 1:
configure cdp power-available no-advertise ports 1
This command was first available in ExtremeXOS 21.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.