show rip interface
Description
Displays RIP-specific configuration and statistics for all VLANs.
Syntax Description
detail |
Specifies detailed display. |
Default
Show summary output for all interfaces.
Usage Guidelines
Summary
includes the following information per interface:
- VLAN name.
- IP address and mask.
- interface status.
- packets transmitted.
- packets received.
- number of triggered updates.
- cost.
Detail includes the following per
interface:
- VLAN name.
- IP address and mask.
- tx mode.
- rx mode.
- cost.
- peer information (for each
peer).
- age.
- version.
- received packets.
- received updates.
- received bad packets.
- received bad routes.
- in policy.
- out policy.
- trusted gateway policy.
- packets transmitted.
- sent triggered updates.
- packets received.
- bad packets received.
- bad routes received.
Example
The following command displays the RIP configuration for all VLANS:
# show rip interface
The following is sample output from this command:
# show rip interface VLAN IP Address Flags Sent Rcvd Triggered Cost Packets Packets Updates Flags: (f) Interface Forwarding Enabled, (i) Interface RIP Enabled (n) Multinetted VLAN, (r) Router RIP Enabled
The following command displays RIP-specific statistics for all VLANs:
# show rip interface detail
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms with an Edge or Base license or higher as described in the ExtremeXOS 32.2 Feature License Requirements document.