Configures the ID used by each device when automatically forming an adjacency with an BGP Auto-peering neighbor.
| auto-peering | Specifies Auto-peering. |
| one-config | Specifies changing the BGP Auto-peering OneConfig configuration. |
| id | Specifies configuring the BPG Auto-peering ID that devices advertise to neighbors. |
| none | Removes the current ID. |
| id | Specifies the ID. |
N/A.
All devices in an Auto-peering cluster have the same ID. Neighbors with different IDs must match the Remote ID table.
The following example configures the ID as "123":
# configure auto-peering one-config id 123
This command was first available in ExtremeXOS 31.1.
This command is available on the ExtremeSwitching X465, X590, X695 series switches.
This feature requires the Advanced Edge or Base license. For more information about licenses, see the ExtremeXOS 32.2 Feature License Requirements .