show inline-power configuration ports

show inline-power configuration ports {port_list}

Description

Displays inline power configuration information for the specified ports.

Syntax Description

port_list Specifies one or more ports. If you do not specify ports, information for all ports appears.

Default

N/A.

Usage Guidelines

The output displays the following inline power configuration information for the specified ports:
  • Config—Indicates whether the port is enabled to provide inline power:
    • Enabled: The port can provide inline power.
    • Disabled: The port cannot provide inline power.
  • Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.
  • Label—Displays a text string, if any, associated with the port.

Example

The following command displays inline power configuration information for ports 1 to 7:

# show inline-power configuration ports 1-7

Port   Config    Operator   Priority   Detection                    Classification   Fast   Label
                 Limit
1      Enabled   15400 mW   Low        802.3af-only                 802.3af-high     N                    
2      Enabled   90000 mW   Low        802.3af-only                 802.3af          N                    
3      Enabled   90000 mW   Low        802.3af-only                 802.3af          N                    
4      Enabled   90000 mW   Low        802.3af-only                 802.3af          N                    
5      Enabled   90000 mW   Low        802.3af-only                 802.3pre-at      N                    
6      Enabled   90000 mW   Low        802.3af-only                 802.3pre-bt      N                    
7      Enabled   90000 mW   Low        802.3af-only                 802.3bt-type4    N              

History

This command was first available in ExtremeXOS 11.1.

Per-port Fast PoE information was added in ExtremeXOS 31.1.

The 802.3af, 802.3af-high, and 802.3pre-at options were added in ExtremeXOS 31.7.

Platform Availability

This command is available on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, and X620 series switches. devices listed in Extreme Networks PoE Devices.