show macsec usage

show macsec usage

Description

Displays a per-port view of MAC Security (MACsec) usage information.

Syntax Description

usage Specifies to display per-port MACsec usage information.

Default

N/A.

Usage Guidelines

Displays the number of ports that have MACsec enabled, and the maximum number of ports allowed, per slot. This command also displays the amount of bandwidth consumed by the enabled ports (assumes maximum throughput), as well as the maximum bandwidth allowed.

If the switch type has no port limit, then the "Port Count Limit" is displayed as N/A. If the switch has no bandwidth limit, then the "Bandwidth Maximum" is also displayed as N/A.

Note

Note

The CLI prevents you from exceeding the port limit but not the bandwidth limit. If the instantaneous traffic across all MACsec-enabled ports exceeds the switch's bandwidth limit, then excess traffic will be dropped.

Example

The following example shows MACsec usage information:

# show macsec usage           
	   ----Port Count----  ------Bandwidth-----
Slots     #Enabled     Limit  Allocated    Maximum
========  ========  ========  =========  =========
Slot-1           1        48    1.0Gbps   50.0Gbps     

Example

The following example shows MACsec usage information on ports 1-5:

# show macsec ports 1-5 usage 
                     Subject                     
               Link  to BW     MACsec   Allocated
Port          Speed  Maximum?  Enabled  Bandwidth
========  =========  ========  =======  =========
1           1.0Gbps  Yes       No               -
2           1.0Gbps  Yes       No               -
3           1.0Gbps  Yes       No               -
4           1.0Gbps  Yes       No               -
5           1.0Gbps  Yes       No               -

History

This command was first available in ExtremeXOS 31.5.

Platform Availability

This command is available on the following platforms.

Note

Note

The MACsec feature requires the installation of the MAC Security feature pack license.
Platform Ports LRM/MACsec Adapter Required?
ExtremeSwitching X460-G2-24p-24hp, X460-G2-24t-24ht switches Half-duplex, 1G ports (25–48) No
All other SFP/SFP+ ports * Yes
ExtremeSwitching X450-G2, X460-G2, X440-G2, X590, X620, and X695 series switches SFP/SFP+ ports * Yes
ExtremeSwitching X465

X465-24W, X465-24XE: ports 1–24

X465-48T, X465-48P, X465-48W, X465i-48W: ports 1–48

X465-24MU-24W: ports 25–48

VIM5-4XE: all 4 ports

VIM5-4YE in X465-24MU, X465-24MU-24W switches: all 4 ports

VIM5-4YE in X465-24W, X465-48T, X465-48P, X465-48W, X464.24S, X465-24S, X465i-48W: first 2 ports only

No
Note: * For ExtremeSwitching X460-G2 series switches, the VIM-2X option does not support the LRM/MACsec Adapter.