Configures the common path health interval or timeout value.
|port||Specifies the port number of the common link port.|
|health-interval||Specifies the interval for health check messages on the common link.|
|timeout||Specifies the timeout value for the common link.|
|seconds||Specifies the amount of health interval, in seconds.|
This command allows you to configure the length of the common path health interval, in seconds, for a given port. The range is from 1 to 10 seconds.
The following command configures a common-link health interval of 5 seconds on port 1:1.
configure eaps shared-port 1:1 common-path-timers health-interval 5
The following command configures a segment timeout of 10 seconds on port 1:1.
configure eaps shared-port 1:1 common-path-timers timeout 10
This command was first available in ExtremeXOS 12.1.
This command is available on all platforms with the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and what licenses are appropriate for this feature, see the ExtremeXOS 32.2 Feature License Requirements document.