Disables one or more ports on the switch.
Specifies one or more ports or slots and ports.
Specifies all ports on the switch.
Use this command for security, administration, and troubleshooting purposes.
When a port is disabled, the link is brought down.
The following command disables ports 3, 5, and 12 through 15 on a stand-alone switch:
disable ports 3,5,12-15
The following command disables ports 3, 5, and 12 through 15 on a switch:
disable port 3,5,12-15
This command was first available in ExtremeXOS 10.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.