install firmware lrm-macsec-adapter
Description
Installs new port (PHY) firmware for LRM/MACsec adapter ports.
Syntax Description
force | Forces installation. |
slot | Designates installing the firmware on a slot. |
slot_number | Sets the slot number to install the firmware on. |
lrm-macsec-adapter | Designates installing LRM/MACsec adapter firmware. |
ports | Designates installing the firmware on particular ports. |
port_list | Sets which ports to install on. |
all | Indicates installing onto all applicable ports. |
Default
N/A.
Usage Guidelines
If the LRM/MACsec adapter port firmware is out-of-date, a message similar to the following
appears in the
log:
<Warn:HAL.Port.Warning> LRM/MACsec Adapter port firmware on port 2:16 is out of date, do 'install firmware lrm-macsec-adapter' to update.
Installing LRM/MACsec adapter port firmware may take several minutes per adapter and interrupts traffic on the affected ports. Loss of power during this process might render the ports unusable.
Example
The following example installs new firmware for the LRM/MACsec adapter on port 2:16:
# install firmware lrm-macsec-adapter ports 2:16 Installing LRM/MACsec Adapter port firmware may take several minutes per adapter and will interrupt traffic on the affected ports. Loss of power during this process may render the ports unusable. Do you want to continue? (y - yes, n - no, <cr> - cancel) Yes .................................................................................................................... LRM/MACsec Adapter port firmware has been updated successfully.
History
This command was first available in ExtremeXOS 30.6.
Platform Availability
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X590, X620-x, X695 series switches.