enable sntp-client
Description
Enables the SNTP client.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
SNTP can be used by the switch to update and synchronize its internal clock from a Network Time Protocol (NTP) server. After the SNTP client has been enabled, the switch sends out a periodic query to the indicated NTP server, or the switch listens to broadcast NTP updates. In addition, the switch supports the configured setting for Greenwich Mean Time (GMT) offset and the use of Daylight Savings Time (DST).
Example
The following command enables the SNTP client:
enable sntp-client
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.