configure forwarding ipmc upnpNEW!

configure forwarding ipmc upnp [flood | learn]


Enables you to forward packets for the UPnP protocol to the VLAN for learning.

Syntax Description

flood Specifies to forward UPnP to VLAN. (Default).
learn Specifies to send UPnP to the CPU for learning.



Usage Guidelines

Use this command to enable UPnP for flood or learn state.

When flood to VLAN is enabled, an actual ACL filter is installed, and one ACL entry is consumed.

When in learn mode, no ACL filters are installed, and no ACL resources are consumed.


The following command enables UPnP to flood to VLAN:

configure forwarding ipmc upnp flood


This command was first available in ExtremeXOS 32.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.