enable ip-security anomaly-protection
notify
enable ip-security anomaly-protection notify [log | snmp | cache] {slot [ slot | all ]}
Description
Enables protocol anomaly notification.
Syntax Description
|
log
|
Specifies the switch to send
the notification to a log file. |
|
snmp
|
Specifies the switch to send
an SNMP trap when an event occurs. |
|
cache
|
Specifies the switch to send
the notification to cache. |
|
slot
|
Specifies the slot to be
used. |
|
all
|
Specifies all IP addresses, or
all IP addresses in a particular state. |
Default
The default is disabled.
Usage Guidelines
This command
enables anomaly notification. When enabled, any packet failed to
pass enabled protocol checking is sent to XOS Host CPU and notifies
the user. There are three different types of notifications:
- log: The anomaly events are logged into EMS log.
- snmp: The anomaly events generate SNMP traps.
- cache: The most recent and unique anomaly events are
stored in memory for review and investigation.
When
disabled, the switch drops all violating packets silently.
History
This command was
first available in ExtremeXOS 12.0.
Platform
Availability
This command is available on ExtremeSwitching X435,
X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.
