Adds a C executable process compiled using the C-based SDK.
|process||User application process.|
|name||Name of the user application process. Range 1-31.|
|exe||Name of the executable relative to /usr/local/cfg.|
|auto||Create a daemon process and start it immediately|
|on-demand||Create a run-to-completion process and use \"start process\.|
|node||Node in stack in which to create the process.|
|node||Primary node, backup node, or both (default is primary).|
|vr||Virtual router in which to start the process.|
|vr-name||Virtual router name (Default is VR-Mgmt).|
VR-Mgmt is the default VR used if not specified.
If no selection is made, the process runs on-demand.
If no node is selected, the default is the primary node.
The executable must be uploaded to /usr/local/cfg using the normal mechanisms (for example, TFTP).
Fields are provided by the user and passed directly into an epmrc entry. Not all epmrc fields are available.
This command adds C executable processes. To add a Python module, use the create process python-module command.
A process must first exist on the primary node if you are creating it only on the backup node, If a process already exists on the primary node, you cannot create it on both the primary and secondary node. Also, if the backup node is down, a new process cannot be created on it.
create process foo_userd executable foobard start auto vr VR-Default description “Run foobard on the default VR” “arg1” “arg2 with spaces”
Error: Process name %s is invalid. Process names must begin with a letter, contain only alphanumeric and “_” characters, and be less than 32 characters long.
This command was first available in ExtremeXOS 15.7.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.