configure ports auto-polarity

configure ports port_list auto-polarity [off | on]

Description

Configures the autopolarity detection feature on the specified Ethernet ports.

Syntax Description

port_list

Specifies one or more ports on the switch.

off

Disables the autopolarity detection feature on the specified ports.

on

Enables the autopolarity detection feature on the specified ports.

Default

Enabled.

Usage Guidelines

This feature applies to only the 10/100/1000 BASE-T ports, and copper medium on combination ports.

When autopolarity is disabled on one or more Ethernet ports, you can verify that status by using the following command:

# show ports information detail

Example

The following command disables the autopolarity detection feature on ports 5 to 7 on a switch:

# configure ports 5-7 auto-polarity off

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.