Configures the egress traffic in an unauthenticated state.
|
all |
Specifies all network login ports. |
|
port_list |
Specifies one or more network login ports. |
|
none |
Specifies that no traffic is sent out if if no authenticated clients exist on the VLAN. |
|
unicast |
Specifies that the unicast flooding traffic for the VLANs on the network login enabled port be sent. |
|
broadcast |
Specifies that the broadcast traffic for the VLANs on the network login enabled port be sent. |
|
all_cast |
Specifies that the broadcast and unicast flooding traffic for the VLANs on the network login enabled port be sent. |
The default is none.
This command allows you to configure the egress traffic in an unauthenticated state on a per-port basis.
Enabling ONEPolicy removes the action of this command. This command is supported only in non-policy mode
This command was first available in ExtremeXOS 12.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.