Disable the CLEAR-Flow agent.
This command has no arguments or variables.
CLEAR-Flow is disabled by default.
When the CLEAR-Flow agent is disabled, sampling stops and the and all rules are left in the current state. It will not reset actions that were taken while CLEAR-Flow was enabled.
The following example disables CLEAR-Flow on the switch:
disable clear-flow
This command was first available in ExtremeXOS 11.1.
This command is available on ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.