configure elrp-client hardware-assist

configure elrp-client hardware-assist loopback-port [port | none]

Description

Configures or unconfigures a front panel port as the designated loopback port for hardware-assisted ELRP.

Syntax Description

elrp-client Configures ELRP client.
hardware-assist Selects configuring hardware-assisted ELRP.
loopback-port Designates selecting a loopback port for hardware-assisted ELRP.
port Selects the loopback port. The port must be an unused front panel port.
none Unconfigures a loopback port.

Default

N/A.

Usage Guidelines

The loopback port must be an unused front panel port. The selected loopback port cannot be part of a VLAN. The loopback port cannot be changed or unconfigured if hardware-assisted ELRP mode is enabled. To disable hardware-assisted ELRP, use the command disable elrp-client .

Example

The following example configures port 7 as the loopback port for hardware-assisted ELRP:

# configure elrp-client hardware-assist loopback-port 7

The following example unconfigures the loopback port for hardware-assisted ELRP:

# configure elrp-client hardware-assist loopback-port none

History

This command was first available in ExtremeXOS 30.3.

Platform Availability

This command is available on the ExtremeSwitching X450-G2, X460-G2, X440-G2, X465, X590, X620-x, X695, series switches.