configure sharing health-check member-port tcp-tracking
Enables or disables configured monitoring on a member port of a health check LAG.
Specifies the member port.
This disables/enables monitoring on a particular member port. When monitoring is disabled, the member port is added back to the LAG if it has not already been added. This allows a member port to be added back to LAG even though connectivity to the host is down.
The following command disables port 12:
configure sharing health-check member-port 12 disable tcp-tracking
This command was first available in ExtremeXOS 12.1.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.