show mpls bfd

show mpls bfd [{vlan} vlan_name | ip_addr]

Description

Displays MPLS BFD client information for a VLAN or interface.

Syntax Description

vlan_name

Specifies the VLAN for which to display MPLS BFD client information.

ip_addr

Specifies the IP address of an interface for which to display MPLS client information.

Default

N/A.

Usage Guidelines

None.

Example

The following command displays the MPLS BFD client information for all next-hop peers:

Switch.1 # show mpls bfd
Next Hop IP       Count   Flags    Admin   Oper   IfName
--------------------------------------------------------
192.84.86.2          13   ASIU        Up     Up   vlan1
192.84.93.12         13   ASIU        Up     Up   vlan2
Flags: A=Session added to BFD server, S=BFD Server synced,
I=Session Init complete, U=State Updates accepted

History

This command was first available in ExtremeXOS 12.4.

Platform Availability

This command is available only on the platforms that support MPLS as described in the ExtremeXOS 32.2 Feature License Requirements document.