show mpls exp replacement
Description
Displays the MPLS QoS profile to EXP value mappings and the status of MPLS EXP replacement (enabled or disabled).
Syntax Description
This command has no arguments or keywords.
Default
N/A.
Usage Guidelines
This command displays MPLS QoS profile to EXP value mappings and the status of MPLS EXP replacement (enabled or disabled). These values are set using the configure mpls exp replacement qosprofile command and can be resent using the unconfigure mpls exp replacement command.
Example
The following is an example of the output of the show mpls exp replacement command:
* BD-10K.28 # show mpls exp replacement QoS Profile --> EXP mapping: QP1 --> 00 QP2 --> 01 QP3 --> 02 QP4 --> 03 QP5 --> 04 QP6 --> 05 QP7 --> 06 QP8 --> 07 EXP Replacement is disabled
History
This command was first available in ExtremeXOS 11.6.
Platform Availability
This command is available only on the platforms that support MPLS as described in the ExtremeXOS 32.2 Feature License Requirements document.