enable mac-lockdown-timeout ports
Enables the MAC address lock down timeout feature for the specified port or group of ports or for all ports on the switch.
|all||Specifies all ports.|
|port_list||Specifies one or more ports or slots and ports.|
By default, the MAC address lock down timeout feature is disabled.
You cannot enable the MAC lock down timer on a port that also has the lock learning feature enabled.
The following command enables the MAC address lock down timeout feature for ports 2:3, 2:4, and 2:6:
enable mac-lockdown-timeout ports 2:3, 2:4, 2:6
This command was first available in ExtremeXOS 11.6.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.