configure snmpv3 engine-boots

configure snmpv3 engine-boots (1-2147483647)


Configures the SNMPv3 Engine Boots value.

Syntax Description

(1-2147483647) Specifies the value of engine boots.



Usage Guidelines

Use this command if the Engine Boots value needs to be explicitly configured. Engine Boots and Engine Time will be reset to one (1) if the Engine ID is changed. Engine Boots can be set to any desired value, but will latch on its maximum, 2147483647.


The following command configures Engine Boots to 4096:

configure snmpv3 engine-boots 4096


This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.