disable snmp access

disable snmp access {snmp-v1v2c | snmpv3}

Description

Selectively disables SNMP on the switch.

Syntax Description

snmp-v1v2c Specifies SNMPv1/v2c access only.
snmpv3 Specifies SNMPv3 access only.

Default

Disabled.

Usage Guidelines

Disabling SNMP access does not affect the SNMP configuration (for example, community strings). However, if you disable SNMP access, you will be unable to access the switch using SNMP.

This command allows you to disable either all SNMP access, v1/v2c access only, or v3 access only.

To allow access, use the following command:

enable snmp access {snmp-v1v2c | snmpv3}

Example

The following command disables all SNMP access on the switch:

disable snmp access

History

This command was first available in ExtremeXOS 10.1.

SNMPv3 was added to ExtremeXOS 12.2. It was also included in ExtremeXOS 11.6.4 and 12.1.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.