Configures the delay time between successive frame transmissions initiated by a value change or status change in any of the LLDP local systems Management Information Base (MIB).
The auto option uses a formula (0.25 * transmit-interval) to calculate the number of seconds.
|auto||Uses the formula (0.25 * transmit-interval) to calculate the seconds.|
|seconds||Specifies the interval at which LLDP notifications are sent. The range is 1 to 8291.|
This is the timer between triggered updates.
The following command configures the delay between LLDP frame transmissions for triggered updates to be automatically calculated:
configure lldp transmit-delay auto
This command was first available in ExtremeXOS 11.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.