unconfigure cfm domain association end-point transmit-interval

unconfigure cfm domain domain_name association association_name {ports port_list end-point [up | down]} transmit-interval

Description

Unconfigures the CCM interval of the association or MEP to the default interval.

Syntax Description

domain_name

Specifies the domain associated with the MA.

association_name

IEEE 802.1ag or ITU-T Y.1731 association name.

port_list

Specifies the ports to unconfigure.

up

Enter this variable if you are changing the time interval for sending a CCM on an UP MEP.

down

Enter this variable if you are changing the time interval for sending a CCM on a DOWN MEP.

Default

1000 ms.

Usage Guidelines

Use this command to revert the CCM interval of either the association or the MEP back to the default CCM interval.

Example

The following command changes the interval the UP MEP (previously configured on port 2:4) uses to send CCM messages on the 350 association in the finance domain to the default of 1000 ms:

unconfigure cfm domain finance association 350 ports 2:4 end-point up transmit-interval

History

This command was first available in ExtremeXOS 12.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.