configure sharing port-based key

configure sharing [ load_sharing_key | default] ports port_list

Description

Sets the load_sharing_key for all ports in the port_list.

Syntax Description

load_sharing_key

Specifies the load sharing key. Valid load sharing keys are in the range [0-15].

default

Unconfigures and resets the load sharing keys for ports in the port_list to default values.

ports

Specifies the logical port for a load-sharing group.

port_list

Specifies one or more ports or slots and ports to be grouped in the LAG.

Default

N/A.

Usage Guidelines

This command sets the load_sharing_key for all ports in the port_list. default unconfigures and resets the load sharing keys for ports in port_list to default values.

Configured load sharing keys are displayed in the output of the show configuration hal command. Both configured and default load sharing keys are displayed in the output of the "show sharing port-based keys" command.

Example

The following example causes all packets received on ports in slot 1 to choose the lowest port number in all aggregators for distribution.:
configure sharing port-based key 0 ports 1

History

This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.