configure sharing port-based key
Description
Sets the load_sharing_key for all ports in the port_list.
Syntax Description
load_sharing_key |
Specifies the load sharing key. Valid load sharing keys are in the range [0-15]. |
default |
Unconfigures and resets the load sharing keys for ports in the port_list to default values. |
ports |
Specifies the logical port for a load-sharing group. |
port_list |
Specifies one or more ports or slots and ports to be grouped in the LAG. |
Default
N/A.
Usage Guidelines
This command sets the load_sharing_key for all ports in the port_list. default unconfigures and resets the load sharing keys for ports in port_list to default values.
Configured load sharing keys are displayed in the output of the show configuration hal command. Both configured and default load sharing keys are displayed in the output of the "show sharing port-based keys" command.
Example
configure sharing port-based key 0 ports 1
History
This command was first available in ExtremeXOS 15.4.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.