Enables you to forward packets for the mDNS protocol to the VLAN for learning.
| flood | Specifies to forward mDNS to VLAN. (Default). |
| learn | Specifies to send mDNS to the CPU for learning. |
flood
Use this command to enable mDNS for flood or learn state.
When flood to VLAN is enabled, an actual ACL filter is installed, and one ACL entry is consumed.
When in learn mode, no ACL filters are installed, and no ACL resources are consumed.
The following command enables mDNS to flood to VLAN:
configure forwarding ipmc mdns flood
This command was first available in ExtremeXOS 32.2.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.