configure mlag peer interval
Description
Configures the length of time between health check hello packets.
Syntax Description
peer_name | Specifies an alpha numeric string identifying the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches. peer. |
msec | Specifies an MLAG peer health-check hello interval in milliseconds. The range is 50-10000ms. The default is 1000ms. |
Default
The interval default is 1000 milliseconds.
Usage Guidelines
Use this command to configure the length of time between health check hello packets exchanged between MLAG peer switches. After three health check hellos are lost, the MLAG peer switch is declared to be failed, triggering an MLAG topology change.Example
The following command sets an interval of 700 milliseconds on the switch101 peer. switch:
# configure mlag peer switch101 interval 700
History
This command was first available in ExtremeXOS 12.5.
Platform Availability
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.