configure dhcp ipv6 client identifier-type
Description
This command configures the DHCPv6 client identifier type for the client. A DHCP server uses this identifier-type to identify clients for the selection of configuration parameters.Syntax Description
dhcp | Configure DHCP |
ipv6 | Configure DHCP IPv6 client |
client | Configure DHCP IPv6 client |
identifier-type | Configure DHCP IPv6 client identifier type |
link-layer | Configure link-layer address (system MAC) as DHCP IPv6 client identifier |
plus-time | Configure link-layer address plus current time as DHCP IPv6 client identifer |
vendor-specific | Configure DHCP IPv6 client identifier by prepending the vendor-specific IANA value |
Default
IPv4.
Usage Guidelines
Use this command to configure the DHCPv6 client identifier type for the client.
History
This command was first available in ExtremeXOS 15.6.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.