clear elsm ports auto-restart
Description
Clears one or more ELSM-enabled ports that are in the Down-Stuck state.
Syntax Description
port_list | Specifies the ELSM-enabled ports that are permanently in the Down-Stuck state. |
Default
N/A.
Usage Guidelines
If you do not have automatic restart enabled, use this command to transition ELSM-enabled ports that are permanently in the Down-Stuck state to the Down state. You can also use the enable elsm ports port_list auto-restart command to transition a port from the Down-Stuck state to the Down state.
For information about the ELSM-enabled ports states, see the command show elsm ports.
If automatic restart is enabled (this is the default behavior), automatic restart automatically transitions the ports from the Down-Stuck state to the Down state. For more information, see the command enable elsm ports auto-restart.
Example
clear elsm ports 2:1-2:2 auto-restart
History
This command was first available in ExtremeXOS 11.4.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.