Creates an OSPFv3 area.
| area_identifier | Specifies an OSPFv3 area, a four-byte, dotted decimal number. |
Area 0.0.0.0.
Area 0.0.0.0 does not need to be created. It exists by default.
The following command creates a non-backbone OSPFv3 area:
create ospfv3 area 1.2.3.4
This command was first available in ExtremeXOS 11.2.
This command is available on platforms with an Advanced Edge or Base license, or higher, as described in the ExtremeXOS 32.2 Feature License Requirements document.