disable ip option loose-source-route
Description
Disables processing of the loose source route IP option in the IPv4 packet header.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
Disables the switch from forwarding IP packets with the IP option for loose source routing turned on. Packets with the loose-source-route option enabled are dropped by the switch.
Example
The following example disables processing of the loose source route IP option:
# disable ip option loose-source-route
History
This command was first available in ExtremeXOS 10.1.
This command was removed in ExtremeXOS 30.1, and then re-introduced in ExtremeXOS 31.2.
Platform Availability
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.