show upm timers
Description
Displays a list of the UPM timers on the system and some of their configuration information.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
Use this
command to see a list of all UPM timers on a switch. The resulting
display shows timer configurations, the associated profile, and
flags to indicate the timer status. Flags are defined below:
- a - active
- d - disabled
- p - periodic
Example
This command displays UPM timer configuration:
show upm timers
The output of this command is similar to the following:
* BD-8808.43 # show upm timers Current Time: 2006-10-16 14:03:55 -------------------------------------------------------------------------------- UPM Profile Flags Next Execution Timer Name time -------------------------------------------------------------------------------- t1 p1 ep 2006-10-16 14:04:00(Every 10 secs) timerA -------------------------------------------------------------------------------- Flags: e - Profile is enabled, d: Profile is disabled o -Timer is non-periodic, p - Timer is periodic
History
This command was first available in ExtremeXOS 11.6.
Platform Availability
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the Universal Port feature, see the ExtremeXOS 32.2 Feature License Requirements document.