This command creates and enables BGP auto-peering using specified BGP router ID and AS number.
| routerid | Designates a BGP router ID. |
| ipaddress | Specifies the BGP router ID as an IP address in IPv4 format (x.y.z.w). |
| AS-number | Designates unique BGP Autonomous System (AS) number. |
| asNumber | Specifies the AS number (1–4,294,967,295). |
N/A
This command creates VLANs dynamically. It also creates a loopback VLAN with an IP address of the BGP router ID. Within BGP, the router ID, AS number, and easyBGP capability are configured along with redistribution of host-mobility routes. Dynamic VLANs are created if no VLANs are specified.
A save and reboot is required if ECMP exceeds 16.
To view BGP auto-peering status, use the command show auto-peering {bgp | ospf}.
The following example creates auto-peering using BGP router ID at 10.3.4.2 with AS 52:
# create auto-peering bgp routerid 10.3.4.2 AS-number 52
This command was first available in ExtremeXOS 22.5.
The requirement to specify a VLAN range was made optional in ExtremeXOS 30.3.
This command is available on the ExtremeSwitching X465, X590, X695 series switches.
This feature requires the Advanced Edge license. For more information about licenses, see the ExtremeXOS 32.2 Feature License Requirements .