disable bootp vlan
Disables the generation and processing of BOOTP packets on a VLAN to obtain an IP address for the VLAN from a BOOTP server.
|bootp||Disable BOOTP client.|
|ipv4||IPv4 client. (default)|
|dhcp||Disable DHCP client.|
|vlan||Specify VLAN to configure BOOTP/DHCP client for.|
|vlan||Specifies a VLAN name.|
|all||Disables all VLANs.|
If the IPv4/IPv6 keyword is not specified, IPv4 is taken as default for the mentioned VLAN.
The following example disables the generation and processing of BOOTP packets on a VLAN named accounting:
disable bootp vlan accounting
This command was first available in ExtremeXOS 10.1.
The ipv4 and ipv6 keywords were added in ExtremeXOS 15.6.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.