configure isis timer lsp-interval
Description
This command sets the minimum time between LSP transmissions.
Syntax Description
vlan all | Applies the timer configuration to all IS-IS VLANs. |
vlan_name | Specifies a single VLAN to which the timer configuration applies. |
milliseconds | Specifies the timer value. The range is 1 to 4294967295 milliseconds. |
Default
33 milliseconds.
Usage Guidelines
This is used to throttle LSP flooding. Higher values reduce network traffic and can help keep underpowered routers from becoming overloaded during network events. Lower values speed up convergence.
Example
The following command sets the minimal LSP interval for IS-IS VLANs to 66 milliseconds:
configure isis vlan all timer lsp-interval 66
History
This command was first available in ExtremeXOS 12.1.
Platform Availability
This command is available on platforms with a Core or Premier license as described in the ExtremeXOS 32.2 Feature License Requirements document.