configure mld ssm-map delete
Deletes an MLD SSM Mapping entry on a VR.
|v6groupnetmask||You must provide group address with the mask length. Instead of configuring separate entries for a continuous range of IP addresses, this optimizes a range of group IP addresses to be configured as a single entry.|
|v6sourceip||Specifies the source IP address for which the SSM should apply.|
|src_domain_name||Provides the option to use DNS to obtain IP addresses dynamically by specifying the domain name.|
|all||Specifies that all the mapping entries associated with v6groupnetmask are deleted.|
|vr vr_name||Specifies the virtual router name.|
When an MLDv1 report is received for this group or group range, the list of sources configured using this command is used as part of source-specific information to PIM.
The following error message displays when specified entry is not found:
ERROR: SSM Mapping entry (ff30::1/128, 2001:0DB8:1::10) not found on VR-Default
The following example deletes a MLD-SSM mapping entry:
configure mld ssm-map delete ff06::/64 2001::1
This command was first available in ExtremeXOS 15.5.
This command is available on the platforms listed for the IPv6 multicast routing feature in the ExtremeXOS 32.2 Feature License Requirements document.