unconfigure pim

unconfigure pim {ipv4 | ipv6} {vlan vlan_name | tunnel tunnel_name | ssm range | border}

Description

Resets all PIM settings on an IPv4 or IPv6 module, or on one or all VLANs, to their default values.

Syntax Description

ipv4 Specifies the IPv4 module from which PIM is to be unconfigured.
ipv6 Specifies the IPv6 module from which PIM is to be unconfigured.
vlan_name Specifies the VLAN from which PIM is to be unconfigured.
tunnel Specifies the tunnel which PIM is to be unconfigured.
tunnel_name Specifies the tunnel name.
border Specifies the border.

Default

If no VLAN is specified, the configuration is reset for all PIM interfaces.

Usage Guidelines

If you unconfigure PIM globally using the unconfigure pim {ipv4|ipv6} command, you also unconfigure PIM-SSM, removing PIM-SSM range and SSM setting for PIM all interfaces. Static RP configuration is not removed in this case.

Example

The following command resets all PIM settings on the VLAN accounting:

unconfigure pim vlan accounting

History

This command was first available in ExtremeXOS 10.1.

The ipv4 and ipv6 keywords were added, giving an option to support this functionality in IPv6 as well, in ExtremeXOS 15.3.

Platform Availability

This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the ExtremeXOS 32.2 Feature License Requirements document.