show ports ip-fix

show ports {port_list } ip-fix {no-refresh | refresh}

Description

Displays IPFIX information on specified port(s).

Syntax Description

port_list Specifies the port(s).
no-refresh Specifies a static page by page display of the data without auto-refresh.
refresh Specifies a continous refresh of output.

Default

N/A.

Usage Guidelines

Use this command to display IPFIX information regarding the global state, flow record count, and which ports are IPFIX enabled.

Example

The following command displays IPFIX information for port 3:1:

show port 3:1 ip-fix no-refresh

Following is sample output:

# show port 3:1 ip-fix no
Port IPFIX Metering
Port   Link   IPFIX            Byte        Pkt Flow Record   Premature State
State  Count            Count       Count    Exports
=============================================================================
3:1       A      E                   0          0           0           0
=============================================================================
> indicates Port Display Name truncated past 8 characters
Link State: A-Active, R-Ready, NP-Port Not Present L-Loopback
IPFIX State: D-Disabled E-Enabled
IPFIX Enabled on Port(s):    3:1

Flow Record Count—how many flow records have been sent from this port.

Premature Exports—the result of a hash bucket being full and the hardware having to export a flow prematurely to make room for a new flow.

History

This command was first available in ExtremeXOS 12.5.

The tag value was added in ExtremeXOS 12.4.4.

The refresh keyword was added in ExtremeXOS 16.1.

Platform Availability

This command is available on only ExtremeSwitching X460-G2 series switches.