show inline-power stats ports

show inline-power stats ports {port_list}

Description

Displays inline power statistics for the specified ports.

Syntax Description

port_list Specifies one or more slots and ports. If you do not specify ports, information for all ports appear.

Default

N/A.

Usage Guidelines

The output displays the following inline power statistics for the specified ports:
  • State—Displays the port power state:

    • Disabled.

    • Searching.

    • Delivering.

    • Faulted.

    • Disconnected.

    • Other.

    • Denied.

  • PD‘s power class—Displays the class type of the connected PD:

    • “-----”: disabled or searching.

    • “class0”: class 0 device.

    • “class1”: class 1 device.

    • “class2”: class 2 device.

    • “class3”: class 3 device.

    • “class4”: class 4 device.

  • Absent—Displays the number of times the port was disconnected.

  • InvSig—Displays the number of times the port had an invalid signature.

  • Denied—Displays the number of times the port was denied.

  • Over-current—Displays the number of times the port entered an overcurrent state.

  • Short—Displays the number of times the port entered undercurrent state.

Example

The following command displays inline power configuration information for ports 1 to 10 in node (slot) 3 on a SummitStack:

show inline-power stats ports 3:1-10

Following is sample output from this command:

STATISTICS COUNTERS
Port  State       Class     Absent  InvSig   Denied    OverCurrent   Short
3:1   delivering  class3        0       0       0         18             0
3:2   delivering  class3        0       0       0          0             0
3:3   searching   class0        0       0       0          0             0
3:4   searching   class0        0       0       0          0             0
3:5   searching   class0        0       0       0          0             0
3:6   searching   class0        0       0       0          0             0
3:7   searching   class0        0       0       0          0             0
3:8   searching   class0        0       0       0          0             0
3:9   searching   class0        0       0       0          0             0
3:10  searching   class0        0       0       0          0             0

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on the This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, and X620 series switches. devices listed in Extreme Networks PoE Devices.

9037554-00 Rev AA