show elrp disabled-ports

show elrp disabled-ports


Displays information about ELRP disabled ports.

Syntax Description

This command has no arguments or variables.



Usage Guidelines

This command displays the results of disabling ports using the configure elrp-client periodic command.

This command displays the following:
  • Exclude EAPS ring ports—Whether EAPS ring ports can be excluded.

  • Exclude VXLAN RTEPs—Whether VXLAN remote endpoints can be excluded.
  • Exclude inter-VLAN loop ports—Whether inter-VLAN loop ports can be excluded.
  • Excluded Ports—User defined ports that will not be disabled.

  • Disabled Port—The port that ELRP disabled.

  • Detected VLAN—The VLAN with looping ELRP PDU(s).

  • Duration—The configured time to keep the port disabled.

  • Time Disabled—The time when ELRP disabled the port.


The following example shows ELRP information for disabled ports:

# show elrp disabled-ports 

  Exclude EAPS ring ports : No
  Exclude VXLAN RTEPs     : Yes
  Exclude inter-VLAN loop ports :No
  Excluded Ports


  Disabled                   Detected             Duration  Time                     Disable  
  Port/Virtual Port          Vlan                 (sec)     Disabled                 Direction


This command was first available in ExtremeXOS 12.4.

The excluded port list was added in ExtremeXOS 12.5.3.

VXLAN remote endpoint exclusion information was added in ExtremeXOS 22.4.

Inter-VLAN loop ports exclusion information was added in ExtremeXOS 30.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.