Disables the logging of CLI configuration commands to the switch Syslog.
This command has no arguments or variables.
Every command is displayed in the log window which allows you to view every command executed on the switch.
The disable cli-config-logging command discontinues the recording of all switch configuration changes and their sources that are made using the CLI via Telnet or the local console. After you disable configuration logging, no further changes are logged to the system log.
To view the status of configuration logging on the switch, use the show management command. The show management command displays information about the switch including the enable/disable state for configuration logging.
The following command disables the logging of CLI configuration command to the Syslog:
disable cli config-logging
This command was first available in ExtremeXOS 11.0.
The cli-config-logging keyword was split into cli config-logging in ExtremeXOS 30.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.