Deletes a dynamic ACL.
|dynamic_rule||Specifies the dynamic ACL name.|
This command deletes a dynamic ACL rule. Before you delete a dynamic ACL, it must be removed from any interfaces it is applied to. Use the configure access-list delete command to remove the ACL from an interface.
The following command deletes the dynamic ACL icmp-echo:
delete access-list icmp-echo
This command was first available in ExtremeXOS 11.3.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, and X695 series switches.